Flytuo 100PCS Solder Seal Wire Connectors, Automotive Heat Shrink Butt Connector Solder Sleeve Waterproof Insulated Electrical Butt Splice Wire Terminals for Marine,Aircraft,Boat,Truck,Stereo,Joint
$7.99
Price: $7.99
(as of May 02,2024 12:54:59 UTC – Details)
Product Description
If you’re working with electrical wiring, you need a set of butt connectors in your tool kit. Butt connectors might be small and slim, but they are critically important. Also called butt splice connectors,it allows you to connect wires to one another, compressing the electrical connection and bringing two opposite wire ends together. With high connectivity and the ability to be crimped for a strong, secure hold, butt connectors come in handy in many electrical applications.
Whether you are working on your boat, vehicle, home or scientific project, our heat shrink solder and seal connectors will ensure solid soldering, increased current flow and weatherproof connections every time.
Package Includes:
25 x White Heat Shrink Solder Connectors: Diameter 1.7 mm, able cross-section 0.25-0.34 mm²(A.W.G.:26-24)
35 x Red Heat Shrink Solder Connectors: Diameter 2.7 mm, Cable cross-section 0.5-1.0 mm²(A.W.G.:22-18)
30 x Blue Heat Shrink Solder Connectors: Diameter 4.5 mm, Cable cross-section 1.5-2.5 mm²(A.W.G.:16-14)
10 x Yellow Heat Shrink Solder Connectors: Diameter 6.0 mm, Cable cross-section 4.0-6.0 mm²(A.W.G.:12-10)
100PCS Solder Seal Wire Connectors
Features:
Shrinkage Ratio 2:1
Material:PEX, Low-temp solder ring,Waterproof hot melt adhesive
An easy One-Step Wire Connections
Easy Identification: Color coded connector tubing
Polyolefin heat shrink butt connectors improve Pullout Strength
High-quality wire connectors in Seal, Strain Relief, Cable Check and Insulation
Melted Solder ensures wires Strongly Connected and avoids wires slipping out from the terminal
Keep the hot air gun a distance of 3-5 cm(1.18-1.97 inch) to the solder connector when the connector is being heated. DO NOT get too close.
Solderless & Crimpless – Save much of your time
Operating T emperature Range:
Connector Working Temperature(Ambient Temperature):
-55°C – 125*C(-679F ~ 257°F)
Minimum Shrink Temperature: 80°C (176°F)
Minimum Temperature for Solder to Melt: 138°C (280.49F)
Compared to the crimp heat shrink butt connectors, you don’t need to use the crimper to crimp the item when using the solder seal wire connectors, save one step to do it. And compare to the old way use solder and heat shrink tubing, you don’t need to use the solder iron to solder the wire, also save one step for soldering. So, the solder seal wire connector is solderless & crimpless, which can save much of your time when you are using it for your project. Besides, you can also use them in hard to reach or limited space environments easily.
Step 1
Move the connector to the middle of the conductor.
Tips: Make sure you strip out the end of the wire long enough for them to overlap one another and stay in the area of the solder sleeve.
Step 2
Apply heat to the connector slowly and evenly with a heat gun with reflector nozzle until it melt with the wire.
Tips: Some of our customers can use lighter to finish the joint, but we strongly recommend to use a heat gun with REFLECTOR NOZZLE to heat shrink the connector, especially for beginners.
Step 3
Finished item display.
Tips: In some case, a solder ring mark will be left after the tin ring was melt, but it doesn’t mean the tin ring is not melted and it fails. As long as there are enough tin melt with the copper then it will hold up strongly, it is unnecessary to pursue 100% meltdown of the solder ring. You can stretch it to test after the connector cool down.
IP67 Waterproof
● The design that Polyolefin Tubing outside and Hot Melt Adhesive inside creates a durable waterproof seal between the wire and the connector.
● Waterproof Connectors would prevent any corrosion even in the most humid environments.
● Transparent Sleeve of the butt connectors provide Visual Inspection. — You can control the operating temperature and heating time.
WARM TIPS:
1.For better results, continuously rotate the connector when applying heat with a HEAT GUN to make the terminal evenly heated;
2.Keep the hot air gun a distance of 3-5 cm(1.18-1.97 inch) to the solder connector when the connector is being heated. DO NOT get too close.
Package Dimensions : 5.35 x 2.76 x 1.14 inches; 2.4 Ounces
Item model number : FT0008
Date First Available : November 17, 2020
Manufacturer : Wenzhou Zhijun Trading Co.,Ltd
ASIN : B08NPSJBT7
Easy&Quick to Install: NO need to crimp, just use a heat gun, the wires can be tightly secured and connected. Timer and mess saver
Durable Connection: Tubing reduces in size and solder will melt and flow nicely through the stripped wires to ensure strong holding, and the wire will never slip out of the connector
High Quality: Comply with all relevant European standards; Shrinking ratio: 2: 1, the insulation shrinks and creates a seal that keeps out corrosion resistance
Package Includes: 25 x White Heat Shrink Solder Connectors; 35 x Red Heat Shrink Solder Connectors; 30 x Blue Heat Shrink Solder Connectors; 10 x Yellow Heat Shrink Solder Connectors. Color-coded tubing makes it easy for you to pick up for use, and it also takes up less space
Wide Applications: Due to High Waterproof, the solder seal wire connectors can be used on your auto, boat, home, trailer, RV or motorcycle wiring project. It is also a great gift for your father or whom like DIY repair project. Please don’t hesitate to contact us if you are not satisfied with your purchase. We would try our best to assist you and ensure your satisfaction
User Reviews
Be the first to review “Flytuo 100PCS Solder Seal Wire Connectors, Automotive Heat Shrink Butt Connector Solder Sleeve Waterproof Insulated Electrical Butt Splice Wire Terminals for Marine,Aircraft,Boat,Truck,Stereo,Joint”
Related Products
$7.99
There are no reviews yet.